User's Manual

4. Testing and Discovery
Page 69 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
4.3. Run a Speed Test
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Tools.
The Tools window (on page 181) opens.
Note: See the description of the Tools window (on page 181) for detailed information about the
options in the window.
4. Scroll to the Speed Test Parameters area (on page 184).
5. In the Target IP / Domain Name text box, enter the IP address to send data packets from
a client to a server OR from one WP201-100 to another.
6. In the Time Period text box, enter the length of time (in seconds) to run the speed test.
Note: The default is 20 seconds.
Example: Enter 120 for a 2 minute speed test.
7. In the Check Interval text box, enter how often the data is reported in the log file.
8. Click the Start button to begin the speed test.
The Results scroll box shows the speed test results as they occur during the test.
This information is read-only.
Note: The default in the IPv4 text box is 5001. It cannot be changed.
Note: The default in the IPv6 text box is 5002. It cannot be changed.
Figure 72: Tools window - Speed Test Parameters area with speed results
information
DRAFT