User's Manual

3. Configuring the WP201-100
Page 51 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Note: The Security column information is from the Wireless Edit dialog box, Security
Mode list box selection.
Several security options are available for the WP201-100.
See Define a WPA-Enterprise Security Mode (on page 105) or
Define a WPA-PSK Security Mode (on page 107) for specific detailed security setup.
d. Optional: Select the Hidden SSID check box to hide the selected SSID from clients.
e. Optional: Select the Client Isolation check box to prevent communication between
client devices.
f. DO NOT select the VLAN Isolation check box to avoid blocking the clients from the
network.
g. Accept the default VLAN ID.
11. If applicable, scroll to the WDS Link Settings area.
Important!: The WDS Link Settings area is only visible when a WDS Operation Mode is
selected in the Operation Mode area (on page 193).
Note: See the description of the WDS Link Settings area (on page 202) for detailed
information about the options in that area.
Figure 51: Wireless window - WDS Link Settings area
12. In the WDS Link Settings area:
a. Click the Security list box arrow and select AES for the security of the WP201-100.
Important!: Using WEP is NOT recommended. It is included only for compatibility with
older devices.
DRAFT