User's Manual

3. Configuring the WP201-100
Page 39 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
h. Click the Data Rate list box arrow and select a data rate for the upload and download
speed.
The lower the data rate selected, the lower the throughput.
Transmission distance may be increased.
i. If applicable, select the Enable option button to activate the Client Limit restriction in
the WP201-100.
j. in the Client Limit text box, enter the maximum number of clients allowed to connect to
the WP201-100.
k. Select the Aggregation - Disable option button to NOT use the Aggregation area.
l. In the RTS/CTS Threshold text box, enter the threshold package size for RTS/CTS.
m. In the Distance text box, enter the distance between the WP201-100 Access Points
and clients.
n. Click the AP Detection Scan button to open the Site Survey window (on page 178)
showing the nearby Access Points.
9. Scroll to the Wireless Settings area.
Note: See the description of the Wireless Settings area (on page 197) for detailed information
about the options in this area.
Figure 35: Wireless window - Wireless Settings area
10. In the Wireless Settings area:
a. Select the Enable check box to activate an SSID profile.
b. In the SSID text box, enter a descriptive SSID name for the current WP201-100 profile.
c. Optional: Click the Edit button to open the Wireless Edit dialog box (on page 208) and
select the appropriate security for the WP201-100.
Note: The Security column information is from the Wireless Edit dialog box, Security
Mode list box selection.
Several security options are available for the WP201-100.
See Define a WPA-Enterprise Security Mode (on page 105) or
Define a WPA-PSK Security Mode (on page 107) for specific detailed security setup.
DRAFT