User's Manual

3. Configuring the WP201-100
Page 37 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
3.1. Access Point Configuration
This procedure configures the WP201-100 as an Access Point.
Example: See Access Point Mode (on page 134) for an example of an Access Point network setup.
Procedure
1. Connect to the WP201-100 Access Point (on page 19).
2. Change the Setup the Computer IP Address Configuration (on page 21).
3. Access the WP201-100 (on page 24).
4. In the WP201-100 Access Panel, click Wireless.
The Wireless window opens.
Note: See the description of the Wireless window (on page 191) for detailed information about
the options in the window.
Figure 33: Wireless window - Wireless Settings area
5. In the Device Name text box, enter a name for the WP201-100.
Important!: The Country / Region is set at the factory and cannot be changed by the user.
6. If applicable, select the Band Steering Enable option button to activate this feature in the
WP201-100.
7. Scroll to the Operation Mode area.
Note: See the description of the Operation Mode area (on page 193) for detailed information
about the options in this area.
DRAFT