User's Manual

WavePro™ WP201 Access Point: User Manual
11. WP201-100 Factory Defaults
These are the factory defaults for the WP201-100:
l Account Settings (on page 240)
l Firmware Upgrade Settings (on page 240)
l Log Settings (on page 240)
l Management Settings (on page 240)
l Email Alert (on page 240)
l HTTPS Setting (on page 241)
l SNMP Setting (on page 241)
l SNMPv3 Settings (on page 241)
l SSH Setting (on page 241)
l Telnet Setting (on page 242)
l Trap Destination (on page 242)
l Network - Basic Settings (on page 242)
l Time Zone Settings (on page 248)
l Tools Settings (on page 248)
l Network - Wireless Settings (on page 242)
l 2.4GHz (on page 242)
l 5GHz (on page 243)
l Fast Handover (on page 244)
l Guest Network Settings (on page 244)
l Mesh Advanced Settings (on page
244)
l 2.4GHz Mesh Settings (on page 244)
l 5GHz Mesh Settings (on page 245)
l WDS AP / Bridge (on page 245)
l WDS Station (on page 245)
l Wireless Settings (on page 245)
l Wireless Setting - 2.4GHz (on page
246)
l Wireless Setting - 5GHz (on page 247)
l WiFi Scheduler Settings (on page 249)
LUM0073AA Rev Feb-2017 Page 239 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT