User's Manual

9. WP201-100 Software Environment
Page 221 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Wireless Edit dialog box - Security Mode
Control Title Control Description
Encryption list box Click the Encryption list box arrow and select the encryption type to use.
The options are:
l AES
l Both (TKIP & AES) (the default)
l TKIP
Important!: All wireless clients MUST use the same settings.
Passphrase text
box
In the Passphrase text box, enter the phrase wireless clients must use to
access the WP201-100.
Important!: All clients MUST use the same Passphrase to connect with
the WP201-100.
l If using an ASCII format, the Passphrase must have a minimum of 8
characters and a maximum of 63 characters in length.
l If using a HEX format, the Passphrase must be 64 HEX characters in
length.
Group Key Update
Interval text box
In the Group Key Update Interval text box, enter how often, in seconds, the
Group Key changes.
Note: After the initial association with the client, the key will change
however often this is set to.
Save button Click Save to save the changes.
DRAFT