User's Manual

WavePro™ WP201 Access Point: User Manual
Operation Mode = WDS Station / Security Mode = WPA(2)-Enterprise
Figure 212: Wireless Edit dialog box - Security Mode = WPA(2)-Enterprise
Wireless Edit dialog box - Security Mode = WPA(2)-Enterprise
Control Area Control Title Control Description
Wireless Setting
area
Preferred BSSID
check box
Select the Preferred BSSID check box to activate the
Wireless Setting area.
Wireless Setting
area
Preferred BSSID
MAC Address
text boxes
In the Preferred BSSID MAC Address text boxes, enter the
MAC address for the primary WDS Access Point.
Wireless Security
area
Security Mode
list box
Click the Security Mode list box arrow and select the
security mode to use in the WP201-100.
The options are:
l Disabled (the default)
l WEP
l WPA-PSK
l WPA2-PSK
l WPA-PSK Mixed
l WPA-Enterprise
l WPA2-Enterprise
l WPA Mixed-Enterprise
Wireless Security
area
EAP Method list
box
Click the EAP Method list box arrow and select either PEAP
or TTLS.
Wireless Security
area
EAP
Authentication
list box
Click the EAP Authentication list box arrow and select
either MS-CHAP or MS-CHAPV2.
LUM0073AA Rev Feb-2017 Page 218 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT