User's Manual

9. WP201-100 Software Environment
Page 217 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
Wireless Edit dialog box - Security Mode = WPA(2)-PSK
Control Area Control Title Control Description
Wireless Security
area
Security Mode
list box
Click the Security Mode list box arrow and select the
security mode to use in the WP201-100.
The options are:
l Disabled (the default)
l WEP
l WPA-PSK
l WPA2-PSK
l WPA-PSK Mixed
l WPA-Enterprise
l WPA2-Enterprise
l WPA Mixed-Enterprise
Wireless Security
area
Encryption list
box
Click the Encryption list box arrow and select the encryption
type to use.
The options are:
l AES
l Both (TKIP & AES) (the default)
l TKIP
Important!: All wireless clients MUST use the same
settings.
Wireless Security
area
Passphrase text
box
In the Passphrase text box, enter the phrase wireless clients
must use to access the WP201-100.
Important!: All clients MUST use the same
Passphrase to connect with the WP201-100.
l If using an ASCII format, the Passphrase must have a
minimum of 8 characters and a maximum of 63 characters
in length.
l If using a HEX format, the Passphrase must be 64 HEX
characters in length.
Save button Click Save to save the changes.
DRAFT