User's Manual

9. WP201-100 Software Environment
Page 213 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
9.16.2. Fast Roaming area
Note: See Fast Roaming Activation (on page 97).
The Fast Roaming feature is supported for the first SSID profile per radio with security types:
l WPA-PSK - This allows user authentication without enterprise network connection.
l WPA-PSK Mixed - This allows user authentication without enterprise network connection.
l WPA-Mixed Enterprise - This requires a RADIUS server to authenticate users.
l WPA2-PSK - This allows user authentication without enterprise network connection.
l WPA2-Enterprise - This requires a RADIUS server to authenticate users.
Figure 208: Wireless Edit dialog box - Fast Roaming area
Wireless Edit dialog box - Fast Roaming area
Control Title Control Description
Enable Fast
Roaming Enable
or Disable option
buttons
Select the Enable option button to serve mobile client devices that roam from
Access Point to Access Point.
To use this feature:
1. Click the Security Mode list box arrow and select the security mode to use in
the WP201-100.
2. Enter a Radius Server IP Address in the text box, and enter the Radius
settings.
This allows Fast Roaming to be enabled.
3. Set the Enterprise Encryption with the same SSID on other Access Points in
the network and enable Fast Roaming.
When the configuration is set on all the Access Points on the network, mobile
client devices can run voice services that require fast roaming to prevent
delay in conversation from Access Point to Access Point.
4. Select the Enable option button to serve mobile client devices that roam from
Access Point to Access Point.
Note: Some applications running on client devices require fast re-
association when they roam to a different Access Point.
Clients must support 802.11r.
DRAFT