User's Manual

WavePro™ WP201 Access Point: User Manual
9.16. Wireless Edit dialog box
The Wireless Edit dialog box is used to:
l Configure the WP201-100 profile.
l Enable extra SSIDs for the WP201-100.
l Enable Wireless MAC Filtering used to allow or deny network access to wireless clients
(e.g., computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses.
Note: This option is only applicable for Access Point, Mesh-AP, and WDS AP modes.
Access and Dialog box Description
In the Wireless window, in the Wireless Settings area (on page 197), click the Edit button.
The Wireless Edit dialog box areas are:
l Wireless Security area (on page 209)
l Fast Roaming area (on page 213)
l Wireless MAC Filter area (on page 214)
l Wireless Traffic Shaping area (on page 215)
Security Mode Options
Different options are available depending on the selected Security Mode in the Wireless Edit
dialog box:
l Security Mode = WEP (on page 209)
l Security Mode = WPA-PSK (on page 209)
l See also Wireless Edit dialog box - Guest Network (on page 220)
l Security Mode = WPA-Enterprise (on page 211)
Operation Mode = WDS Station
Note: The Wireless Edit dialog box has different options when opened from the Wireless window -
Wireless Settings area - Operation Mode = WDS Station (on page 199).
l Operation Mode = WDS Station / Security Mode = WEP (on page 216)
l Operation Mode = WDS Station / Security Mode = WPA(2)-PSK (on page 216)
l Operation Mode = WDS Station / Security Mode = WPA(2)-Enterprise (on page 218)
LUM0073AA Rev Feb-2017 Page 208 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT