User's Manual

7. Administration
Page 122 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
9. In the Community Name (Read Write) text box, enter the password the SNMP
community uses for read/write access.
10. In the Trap Destination area:
a. In the Port text box, enter the port for the SNMP server.
b. In the IP Address text box, enter the IP address of the computer that will receive the
SNMP traps.
c. In the Community Name text box, enter the password for the SNMP trap community.
11. In the SNMPv3 Settings area:
a. Select the Enable option button to activate the SNMPv3 feature in the WP201-100.
b. In the Username text box, enter the Username for SNMPv3.
c. Click the Authorized Protocol list box arrow and select the authentication protocol
type.
d. In the Authorized Key text box, enter the authentication key for SNMPv3.
e. Click the Private Protocol list box arrow and select the DES privacy protocol.
f. In the Private Key text box, enter the privacy key for the SNMPv3.
g. In the Engine ID text box, enter the engine ID for SNMPv3.
12. Scroll to the bottom of the Advanced window.
13. Click Apply to save the changes.
14. If applicable, continue with other changes for the WP201-100.
DRAFT