User's Manual

WavePro™ WP201 Access Point: User Manual
7.10.2. Automatically Set the Date and Time
Important!: This procedure REQUIRES a connection to an NTP Server.
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Time Zone.
The Time Zone window opens.
Note: See the description of the Time Zone window (on page 179) for detailed information
about the options in the window.
Figure 136: Time Zone window
4. Click the Automatically Get Date and Time option button.
5. In the NTP Server text box, enter the IP address or domain name of an NTP server to have
the WP201-100 internal clock automatically synchronize to it.
6. Click Apply to save the changes.
7.10.3. Set the WP201-100 Time Zone
This procedure is used to select the time zone the WP201-100 is located in and, if applicable,
activate Daylight Savings Time.
Important!: This procedure REQUIRES a connection to an NTP Server.
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Time Zone.
The Time Zone window opens.
Note: See the description of the Time Zone window (on page 179) for detailed information
about the options in the window.
LUM0073AA Rev Feb-2017 Page 115 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT