User's Manual

WavePro™ WP201 Access Point: User Manual
7.7. Email Alert - Activate and Define
Use the Email Alert feature to send messages to the designated e-mail address when important
system events occur.
Procedure
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Advanced.
The Advanced window opens.
Note: See the description of the Advanced window (on page 144) for detailed information
about the options in the window.
4. Scroll to the Email Alert area.
Note: See the description of the Email Alert area (on page 150) for detailed information about
the options in that area.
Figure 128: Advanced window - Email Alert area
5. In the Email Alert area:
a. Select the Enable check box to activate the Email Alert feature in the WP201-100.
b. In the From text box, enter the e-mail address to show the sender of the e-mail.
c. In the To text box, enter the e-mail address to receive e-mail alerts.
Important!: Do NOT use a personal e-mail address.
This can unnecessarily expose the personal e-mail login credentials.
Instead, create and use a separate e-mail account specifically for this feature.
d. In the Subject text box, enter the text to appear in the e-mail subject line.
LUM0073AA Rev Feb-2017 Page 109 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT