User's Manual

WavePro™ WP201 Access Point: User Manual
7.5. Define a WPA-Enterprise Security Mode
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24).
3. In the WP201-100 Access Panel, click Wireless.
The Wireless window opens.
Note: See the description of the Wireless window (on page 191) for detailed information about
the options in the window.
4. In the Wireless Settings area, click the Edit button.
The Wireless Edit dialog box opens.
Note: See the description of the Wireless Edit dialog box (on page 208) for detailed
information about the options in the dialog box.
5. Click the Security Mode list box arrow and select WPA-Enterprise.
Figure 122: Wireless Edit dialog box - Security Mode = WPA-Enterprise
6. Click the Encryption list box arrow and select the encryption type to use.
Important!: All wireless clients MUST use the same settings.
7. In the Group Key Update Interval text box, enter how often, in seconds, the Group Key
changes.
8. In the Radius Server text box, enter the IP address of the Radius server.
9. In the Radius Port text box, enter the port number used for connections to the Radius
server.
10. In the Radius Secret text box, enter the secret required to connect to the Radius server.
11. Click the Radius Accounting list box arrow and select Enable to activate the accounting
feature of the WP201-100.
a. In the Radius Accounting Server text box, enter the IP address of the Radius
Accounting server.
LUM0073AA Rev Feb-2017 Page 105 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT