User's Manual

7. Administration
Page 100 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
7.3. Guest Network Settings - Activate and Define
1. Connect to the WP201-100 Access Point (on page 19).
2. Access the WP201-100 (on page 24)
3. In the WP201-100 Access Panel, click Wireless.
The Wireless window opens.
Note: See the description of the Wireless window (on page 191) for detailed information about
the options in the window.
4. Scroll to the Guest Network Settings area.
Note: See the description of the Guest Network Settings area (on page 204) for detailed
information about the options in that area.
Figure 115: Wireless window - Guest Network Settings area
5. Select the Enable check box to activate the Guest Network Settings area in the WP201-
100.
6. In the SSID text box, enter a descriptive SSID name for the current WP201-100 profile.
7. Optional: Click the Edit button to open the Wireless Edit dialog box - Guest Network (on
page 220).
Note: See Define a Guest Network Security Mode (on page 102).
The information in the Security text box shows the Security Mode selected in the Wireless
Edit dialog box - Guest Network (on page 220).
8. Optional: Select the Hidden SSID check box to hide the selected SSID from clients.
Important!: If the Hidden SSID check box is selected, the SSID does NOT appear in the
site survey.
9. Optional: Select the Client Isolation check box to prevent communication between client
devices.
DRAFT