User's Manual

WP201 Access Point: User Manual
2.4 Changing the WP201 Mode
1. In the Access Panel on the left, click Network > Wireless.
The Wireless window opens.
Figure 14: Wireless window
2. Click the Operation Mode list box arrow for the designated frequency and select the
applicable Mode for the WP201.
Note: See Modes for detailed information and examples about the different modes.
3. Scroll to the bottom of the window and click Save.
Figure 15: Wireless window
A Processing bar appears.
LUM0073AA Rev Aug-2015 Page 23 of 38
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.