User's Manual

WP201 Access Point: User Manual
Figure 11: Local Area Connection Properties dialog box
Note: The default WP201 IP Address is 192.168.1.1.
Example: Enter an IP Address from 192.168.1.2 to 192.168.1.254 and the Subnet Mask to
255.255.255.0.
11. Click OK to save the changes and close the dialog box.
12. Click Close twice to close the Local Area Connection Properties and Local Area
Connection Status dialog boxes.
LUM0073AA Rev Aug-2015 Page 21 of 38
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.