User's Manual

2. WP201 Installation and Setup
Figure 10: Local Area Connection Properties dialog box
8. Click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens.
9. Select the Use the following IP address option button.
10. In the IP Address text box, enter an IP Address that is DIFFERENT from the WP201.
Page 20 of 38 LUM0073AA Rev Aug-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.