User's Manual

WP201 Access Point: User Manual
2.2 WP201 IP Address Configuration
1. Turn on the computer.
2. Click the Windows® Start button and select Control Panel.
3. Click Network and Internet > View Network Status and Tasks.
4. Click the Change adapter settings link.
5. Double-click the Local Area Connection link.
Figure 8: Local Area Connection link
The Local Area Connection Status dialog box opens.
Figure 9: Local Area Connection Status dialog box
6. Click Properties.
The Local Area Connection Properties dialog box opens.
7. Select the Internet Protocol Version 4 (TCP/IPv4) option.
LUM0073AA Rev Aug-2015 Page 19 of 38
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.