User's Manual

1. WP201 Overview
1.4.2 Back of the WP201
Figure 3: Back of the WP201
Back of the WP201
# Name Description Accessory
Location***
3 Ground screw
hole
Using the enclosed Packaged Ground Screw, attach
the loop end of one of the supplied Green Ground
Cables to the ground point on the Back of the WP201 (on
page 14).
Important!: The Green Ground Cable MUST BE
attached to the WP201 BEFORE the Mounting
Bracket is attached.
E
4 Mounting
Holes
The Mounting Holes are used to attach the Mounting
Bracket to the WP201.
A
Note: ***See WP201 Included Accessories (on page 11).
Page 14 of 38 LUM0073AA Rev Aug-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.