User's Manual

1. WP201 Overview
Example: Several WP201 Access Points can be deployed in a campus setting using the 5GHz
band as a backhaul to provide multiple 2.4GHz wireless cells for computers or mobile devices
in common outdoor areas.
l A maximum of 29dBm transmit power, enabling long range connectivity.
l There are three detachable:
l 5dBi 2.4GHz omni-directional antennas.
l 7dBi 5GHz omni-directional antennas.
l Mesh Supported (2.4GHz).
l 802.3at - capable switches or injectors.
l Band Steering shifts Dual Band clients to 5GHz for better throughput performance.
l Secured Guest Network option available
Notes
l Maximum data rates are based on IEEE 802.11 standards.
l Actual throughput and range may vary depending on many factors including environmental
conditions, distance between devices, radio interference in the operating environment, and
mix of devices in the network.
l Features and specifications are subject to change without notice.
l Trademarks and registered trademarks are the property of their respective owners.
1.1 System Requirements
These are the system requirements needed to configure the WP201:
l Computer with:
l an Ethernet interface or wireless network capability
l Windows® 7 or greater, Mac OS, or Linux-based operating systems.
l Broadband Internet Service (Cable or DSL Modem)
l Web browser (i.e., Internet Explorer, Firefox, Safari, Chrome).
1.2 User-supplied Equipment
l Computer with Windows® 7 or greater
l Qty-2: CAT5e Ethernet cables without strain relief
Page 10 of 38 LUM0073AA Rev Aug-2015
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.