User's Manual

2. WPV10-100™ Camera Installation and Setup
Page 16 of 32 LUM0078AA Rev Apr-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
2.1 Connect to the WPV10-100™ Camera
1. Screw the antenna onto the WPV10-100™.
Figure 3: Antenna on the WPV10-100™
2. Connect the camera to the computer using the Ethernet cable.
3. Connect the supplied power cable from the camera to a power outlet.