User Manual

5. ZumLink Z9-C or Z9-T Settings and Descriptions
Page 29 of 40 LUM0075AA Rev May-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced
in whole or in part by any means without written permission from FreeWave Technologies, Inc.
radioSettings - ZumLink Settings and Descriptions
Page CLI Command Description
[Page=radioSettings] radioSettings.nodeId=
Important!: Each radio with the same networkId must have a
UNIQUE nodeId.
l This setting defines the ID of the radio.
l The Gateway device will always have a nodeId of value 1.
l Enter any number between 2 and 65533.
Note: The default value is a unique number between 2 and 65533
for an Endpoint.