User Manual

ZumLink Z9-C or Z9-T
radioSettings - ZumLink Settings and Descriptions
Page CLI Command Description
[Page=radioSettings] radioSettings.maxPacketSize=
John asks: Can this really be set from the CLI
John says this CANNOT be changed in Thor A
is this other content applicable to Thor B?
Note: This is a ZumLink Golden Setting.
l The options are any number between 0 and 9.
l Max packet size can be optimized.
FreeWave Recommends: Use the default settings for normal
operation.
[Page=radioSettings] radioSettings.networkId=
Note: This is a ZumLink Golden Setting.
This is the Network Identifier. The networkId setting is used to
subdivide traffic on radio units.
l Radio units can only communicate with other units that have the
same networkId setting.
Note: If radios are on the same frequency they will still receive
data from radios of a different networkId, but the data is dropped.
Enter any number between 0 and 65535.
Note: The default value is 43981.
LUM0075AA Rev May-2016 Page 28 of 40
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced
in whole or in part by any means without written permission from FreeWave Technologies, Inc.