User Manual

2. ZumLink Z9-C or Z9-T CLI Configuration
Page 12 of 40 LUM0075AA Rev May-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
11. In Tera Term, press <Enter>.
The FreeWave Shell returns.
Figure 5: FreeWave Shell in Tera Term
12. At the > prompt, type pages and press <Enter>.
The available ZumLink information appears.
Figure 6: Pages information
13. Type radiosettings and press <Enter>.
The ZumLink radioSettings appear.