User Manual

5. ZumLink Z9-C or Z9-T Settings and Descriptions
Page 24 of 40 LUM0075AA Rev May-2016
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced
in whole or in part by any means without written permission from FreeWave Technologies, Inc.
radioSettings - ZumLink Settings and Descriptions
Page CLI Command Description
[Page=radioSettings] radioSettings.frequencyKey= The Frequency Key is a number used as an index to select a hopping
table.
Note: The Endpoint radios will obtain this value from a Gateway
with the same networkId.
l The Frequency Key setting boundaries are 0 (zero) to 31.
l When a hop table loads, the Frequency Key is adjusted to
whatever is available in the actual hop table.
l An invalid frequency setting is determined by being outside of the
specified range.
l If an invalid frequency setting is found, the Frequency Key is
NOT changed.
l A frequency setting can also be invalid if the Frequency Key setting
is larger than the number of hopping tables for a specific rfDataRate.
l In that case, the Frequency Key is set to 0 (zero).
l settings at 1M rfDataRate, it looks like any invalid setting will not
change the frequency key for any type of error --- This came from
John's edits - does it need to be included here for Thor A?
l The options are Key0 (zero) to Key23. TRUE?
Note: The default value is Key0 (zero).