User Manual

5. ZumLink Z9-C or Z9-T Settings and Descriptions
These are the Page Settings for the ZumLink Z9-C or Z9-T:
l config (on page 20)
l diagPortConfig (on page 21)
l radioSettings (on page 23)
l radioStatus (on page 33)
l serialPortConfig (on page 34)
l system (on page 35)
l systemInfo (on page 36)
Note: If the "=" sign is appended to the parameter, it is an implied change to that parameter.
If a value is NOT included after the "=", the value becomes a null, space, or 0 (zero) depending on the parameter.
Example: Entering txPower returns the current value of txPower.
Entering txPower= is an implied change to txPower.
If a value is NOTincluded, it changes txPower to 10.
LUM0075AA Rev May-2016 Page 19 of 40
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by FreeWave. This document cannot be reproduced
in whole or in part by any means without written permission from FreeWave Technologies, Inc.