Reference Manual
Table Of Contents
- Preface
- 1. Overview
- Untitled
- 2. Equipment
- 3. Installation
- 4. Basic Radio Programming and Setup
- 4.1. Define the Network Type and the Radio's Role in that Network
- 4.2. Establish Communication with Instrumentation and Computers
- 4.3. Establishing Communication with Other Radios in the Network
- 4.4. Set the Data Transmission Characteristics
- 4.5. Set Radio Passwords
- 4.6. Set the Hop Table Size in the Terminal Interface
- 4.7. Set the Radio to a Single Channel in a Terminal Emulator
- 4.8. Set the Radio to Hop Channels
- 4.9. Edit Frequencies for Multiple Channels
- 5. Configure Point-to-MultiPoint Networks
- 5.1. Point to MultiPoint Network Characteristics
- 5.2. Point-to-MultiPoint Network Quick Start (Terminal Interface)
- 5.3. Overlapping MultiPoint Networks
- 5.4. Establishing Communication with Other Radios in a MultiPoint Network
- 5.5. Routing Communication Through the Network
- 5.6. Setting Other MultiPoint Parameters
- 5.7. Reading Diagnostics in Tool Suite
- 6. Configure Point-to-Point Networks
- 7. View Radio Statistics
- 8. Release Notes
- 9. Additional Radio Information
- Appendix A: Technical Specifications
- Appendix B: RF Board Pin-Out
- Appendix C: RS232 Pin Assignments - DB9
- Appendix D: LRS455 Frequency Table
- Appendix E: Factory Default Settings
- Appendix F: Point-to-MultiPoint Operation LEDs
- Appendix G: Point-to-Point Operation LEDs
- Appendix H: FreeWave Legal Information
- Blank Page
- Blank Page
Appendix A: Technical Specifications
LUM0020CD Rev June-2020 Page 94 of 112 Copyright © 2019FreeWave
This document is subject to change without notice. This document is the property of FreeWave Technologies, Inc.
and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in
part by any means without written permission from FreeWave Technologies, Inc.
Data Transmission
Data Transmission
Specification Description
Modulation
l 2 level GFSK
l 4 level GFSK
Link Throughput
l 8.3125 kbps, standard speed
l 16.875 kbps, high speed
Error Detection 32-bit CRC, retransmit on error
Hopping Channels 5,601 channels @ 6.25 kHz
Protocol
l Board Level Unit:
l RS232 / RS485 / RS422 (-C)
l TTL (-T)
l Enclosed Unit: RS232 / RS422 / RS485
General Information
General Information
Specification Description
Operating Temperature
l -30°C to +60°C
l -22°F to +140°F
Humidity 0 to 95% non-condensing
Dimensions
l Board Level Unit
l 137.29 L x 61.85 W x 21.49 H (mm)
l 5.40 L x 2.44 W x 0.85 (in.)
l Enclosed Unit
l 172.71 L x 111.43 W x 34.19 H (mm)
l 6.80 L x 4.39 W x 1.35 H (in.)
Weight
l Board Level Unit: 74.4g (0.16 lbs.)
l Enclosed Unit: 605g (1.33 lbs.)
Interfaces
Interfaces
Specification Description
Data Interface Serial, 1200 bps to 230.4 kbps
LRS455A-C, LRS455A-CE, LRS455-T
User-Reference Manual