Reference Manual

Table Of Contents
4. Basic Radio Programming and Setup
As you set up your network, whether it be a Point-to-MultiPoint network or a Point-to-Point
network, the process for setting up and programming a radio is the same. This chapter describes
the following aspects of programming and setting up a radio, regardless of the network type.
l Define the Network Type and the Radio's Role in that Network (on page 27)
l Establish Communication with Instrumentation and Computers (on page 29)
l Establishing Communication with Other Radios in the Network (on page 36)
l Set the Data Transmission Characteristics (on page 37)
l Set Radio Passwords (on page 51)
LUM0020CD Rev June-2020 Page 26 of 112 Copyright © 2019FreeWave
This document is subject to change without notice. This document is the property of FreeWave Technologies, Inc.
and contains proprietary information owned by FreeWave. This document cannot be reproduced in whole or in
part by any means without written permission from FreeWave Technologies, Inc.
LRS455A-C, LRS455A-CE, LRS455-T
User-Reference Manual