Reference Manual
Table Of Contents
- Preface
- 1. Overview
- Untitled
- 2. Equipment
- 3. Installation
- 4. Basic Radio Programming and Setup
- 4.1. Define the Network Type and the Radio's Role in that Network
- 4.2. Establish Communication with Instrumentation and Computers
- 4.3. Establishing Communication with Other Radios in the Network
- 4.4. Set the Data Transmission Characteristics
- 4.5. Set Radio Passwords
- 4.6. Set the Hop Table Size in the Terminal Interface
- 4.7. Set the Radio to a Single Channel in a Terminal Emulator
- 4.8. Set the Radio to Hop Channels
- 4.9. Edit Frequencies for Multiple Channels
- 5. Configure Point-to-MultiPoint Networks
- 5.1. Point to MultiPoint Network Characteristics
- 5.2. Point-to-MultiPoint Network Quick Start (Terminal Interface)
- 5.3. Overlapping MultiPoint Networks
- 5.4. Establishing Communication with Other Radios in a MultiPoint Network
- 5.5. Routing Communication Through the Network
- 5.6. Setting Other MultiPoint Parameters
- 5.7. Reading Diagnostics in Tool Suite
- 6. Configure Point-to-Point Networks
- 7. View Radio Statistics
- 8. Release Notes
- 9. Additional Radio Information
- Appendix A: Technical Specifications
- Appendix B: RF Board Pin-Out
- Appendix C: RS232 Pin Assignments - DB9
- Appendix D: LRS455 Frequency Table
- Appendix E: Factory Default Settings
- Appendix F: Point-to-MultiPoint Operation LEDs
- Appendix G: Point-to-Point Operation LEDs
- Appendix H: FreeWave Legal Information
- Blank Page
- Blank Page
Appendix H: Continuous Transmit Operating Instructions
LRS455A-C, LRS455A-CE, LRS455-T
User-Reference Manual
To set Transmit Channel:
To create channel at 435 MHz channel (channel 0):
From Main Menu, press 3, 0, F, 0, 0, Enter, 0000, Enter, 0000, Enter, Esc, Esc.
To select channel 0 (435 MHz):
From Main Menu, press 3, 0, F, 1, 0, Enter, Esc, Esc.
To create channel at 450 MHz channel (channel 7):
From Main Menu, press 3, 0, F, 0, 7, Enter, 2400, Enter, 2400, Enter, Esc, Esc.
To select channel 7 (450 MHz):
From Main Menu, press 3, 0, F, 1, 7, Enter, Esc, Esc.
To create channel at 460 MHz channel (channel 9):
From Main Menu, press 3, 0, F, 0, 9, Enter, 4000, Enter, 4000, Enter, Esc, Esc.
To select channel 9 (460 MHz):
From Main Menu, press 3, 0, F, 1, 9, Enter, Esc, Esc.
To create channel at 470 MHz channel (channel 15):
From Main Menu, press 3, 0, F, 0, 15, Enter, 5600, Enter, 5600, Enter, Esc, Esc.
To select channel 15 (470 MHz):
From Main Menu, press 3, 0, F, 1, 15, Enter, Esc, Esc.
To Set 2-GFSK Mode:
From Main Menu, Press 3, press 4, press 5, press Esc.
To Set 4-GFSK Mode:
From Main Menu, Press 3, press 4, press 4, press Esc.
To set radio to Continuous Transmit Mode modulated :
From Main Menu, press 5, C, 0, 0, esc
press 4, press T (uppercase).
Push Reset button to stop.
To set radio to Continuous Transmit Mode unmodulated :
From Main Menu, press 5, C, 1, 0, esc
press 4, press T (uppercase).
Push Reset button to stop.