User's Manual

WavePoint 10e
Example 1: Point-to-Multipoint 80
Setup Procedure 80
Example 2: Point-to-Multipoint 81
Configuring Wireless Communication 82
Defining Advanced Radio Settings 85
Verify the Wireless Connection 88
Enabling Virtual Access Points 89
Change a Virtual Access Point's Settings 90
Wireless Security 91
Authorizing Wireless Access 91
Restricting Access by MAC Address 92
Set the ACL Policy Type 93
Add or Edit MAC Addresses in the ACL List 93
Delete a Device from the List 94
Enabling Rogue Access Point Detection 94
Review Devices that Attempted to Access the Network 94
Defining EAP Authentication and External RADIUS Servers 95
Configure the EAP Authentication 95
Define an External RADIUS Server 96
Scheduling When Wireless Connections are Available 97
Define and Enable a Schedule for a Wireless Connection 97
Disable a Schedule 98
Chapter 5: Security 99
Firewall Overview 99
Firewall Basic Policies 99
LUM0063AA Rev 05/05/2014 Page 9 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.