User's Manual

Table Of Contents
WavePoint 10e
Interface Statistics dialog
3. Scroll down the dialog to locate the vap10 (upstream) and vap11 (downstream)
information.
4. Highlight the VAP address to use in the WaveMesh.
Note: The Interface Statistics dialog box shown here is only for the
WavePoint model WP10e-S100-100-100.
Other WavePoint 10e devices will use different VAP number.
Interface Statistics dialog box with highlighted VAP11 address.
3. Press <Ctrl+C> to copy the address to the clipboard.
This address is used in Step 10.
4. On the Wireless LAN menu, click Parent Configuration.
LUM0063AA Rev 05/05/2014 Page 73 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.