User's Manual

Table Of Contents
WavePoint 10e
WaveMesh using Branch Selection Method
This procedure establishes the WavePoint WaveMesh using a defined number of hops the non-
root device is required to use to locate the root device.
1. On the Wireless LAN menu, click Parent Configuration.
Wireless LAN > Parent Configuration menu
The Parent Selection Profile window opens.
Parent Selection Profile window
2. Right-click the device to configure.
3. On the right-click menu, click Edit.
LUM0063AA Rev 05/05/2014 Page 69 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.