User's Manual

Table Of Contents
Chapter 3: Additional Data Networking Features
WaveMesh
Using WavePoint to create a WaveMesh provides:
l A machine to machine (M2M) solution.
l A self-healing environment.
l Multiple paths for quicker response.
l Redundancy support for the network.
l Fault tolerance.
Important: Only the non-root devices can be changed.
The WavePoint configured in Client mode must be the endpoint of the network
for M2M.
WaveMesh Methods
These are the methods for creating a WaveMesh:
l WaveMesh using Auto Selection Method on page 66
l WaveMesh using Branch Selection Method on page 69
l WaveMesh using a List Selection Method on page 72
Page 64 of 171 LUM0063AA Rev 05/05/2014
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.