User's Manual

Table Of Contents
Chapter 1: Introduction
Wireless Access
Multiple Repeaters
WavePoint 10e provides wireless access by extending the distance of the network using back-to-
back Repeaters:
Connecting and Logging In
WavePoint 10e uses web pages for configuration.
Setup and configure the WavePoint 10e while it is in an easily accessible location.
Note: These instructions assume the computer has a static IP address assigned.
Change the computer's IP address to be within the same subnet as the default
address of the WavePoint 10e (192.168.1.1).
A WavePoint 10e from the factory has these user types:
Page 32 of 171 LUM0063AA Rev 05/05/2014
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.