User's Manual
Table Of Contents
- WavePoint™ Product Safety
- Preface
- Chapter 1: Introduction
- Key Features and Supported Protocols
- Requirements
- Accessories
- Product Variations
- WavePoint 10e Labels
- WavePoint™ Components
- Certified Antennas
- Connect Power
- Network Deployment Scenarios
- Connecting and Logging In
- Configuration Pages
- Chapter 2: Configuring Basic WavePoint™ Network Features
- Chapter 3: Additional Data Networking Features
- Chapter 4: Configuring Wireless Access
- Example: Point-to-Point Configuration
- Point-to-Multipoint Configuration Examples
- Configuring Wireless Communication
- Defining Advanced Radio Settings
- Verify the Wireless Connection
- Enabling Virtual Access Points
- Wireless Security
- Scheduling When Wireless Connections are Available
- Chapter 5: Security
- Chapter 6: Management and Administration
- Set Up Remote Access to the WAN Port
- User Access Management
- Software Maintenance
- System Logging
- Simple Network Management Protocol (SNMP)
- Authentication Certificates
- Setting the Date and Time
- System Statistics
- Chapter 7: Diagnostics and Troubleshooting
- Appendix A: Factory Default Settings
- Chapter B: Installation Instructions
- Appendix C: WavePoint™ Configurations
- Appendix D: Bench Test Verification of WavePoint™ Configuration
- Appendix E: WavePoint 10e Technical Specifications
- Glossary
- Index
Appendix E: WavePoint 10e Technical Specifications
WavePoint™ Technical Specifications
Specification Description
1 RS-485, RJ-45
USB Interface Micro USB, Type B for configuration
LAN / WAN
802.3 and 802.3u, IPv4, TCP, UDP, ICMP
DHCP Server and Client, NAT
VLAN Up to 4 VLAN pass-through
LAN Security
RADIUS, X.509 Certificates,
MAC Filtering with ACL
IPsec, AES-128, AES-256, SSH, SSH-2
Management
SNMP v2 and v3, WebGUI, HTTP/HTTPS
RIP v1/v2, STP,* RSTP,* DNS, NAT, NTP
QoS 802.1p/q
Enclosure / Power
Dimensions
241mm x 51mm x 165mm
(9.5" x 2.0" x 6.5")
Weight 1.9kg (4.25lbs.)
Material Aluminum, Powder coated finish
Mounting Options DIN Rail, Brackets
Input Voltage 10 to 30VDC / 802.3at, PoE+ (optional)
Power Consumption 10W to 24W, configuration dependent
Status LEDs Power, GPS, Radio 1 through 4
Environmental / Compliance
Operating Temperature -35°C to +65°C
Humidity 0 to 95% non-condensing
ESD
EN 61000-4-2 with 15kV air and 8kV
contact discharge
Page 162 of 171 LUM0063AA Rev 05/05/2014
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.