User's Manual

Table Of Contents
Preface
This document provides information to configure and setup the WavePoint 10e device and
includes:
l An introduction to the WavePoint 10e device and its key features.
l Physical components of the device including its ports and LEDs.
l Configuring a basic WavePoint 10e network.
l Setting up wireless access.
l Using a WavePoint 10e for local communication or as a Wi-Fi hotspot.
l Performing general administrative tasks (e.g., setting up users, defining the system time).
l Performing basic diagnostics, including troubleshooting tips.
The WavePoint 10e has a variety of configurations for installation flexibility.
Note: The information provided in this documentation assumes the user has a general
understanding of networking devices (e.g., routers, bridges, etc.) and Ethernet and
RF communication.
Contacting FreeWave Technical Support
For up-to-date troubleshooting information, check the Support page at www.freewave.com.
LUM0063AARev 05/05/2014 Page 15 of 171
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.