User's Manual

Chapter 6: Management and Administration
11. In the Send Email Logs by Schedule section, select how often the system should
compile and send the log file to the provided email addresses.
Note: Selecting Never in this field disables log emails but preserves the email
server settings.
12. Click Save to save the changes or Cancel to clear any changes without saving.
Sending Logs to Syslog Servers
Use Logging servers or Syslog servers to collect and store logs from the WavePoint 10e in an
external location.
Using a Syslog server instead of the available log viewer in the Configuration
pages provides addition memory storage and allows the collection of a number of
logs over a longer period of time.
Collecting data using Syslog servers can be useful for troubleshooting network
issues.
When the log types to collect have been defined, a maximum of eight servers can be defined to send
log messages and log data to. Indicate which facilities and severity levels to send to each server.
Procedure
1. Connect to the WavePoint 10e either through an Ethernet cable connected to Ethernet
port 3 or 4 or through the computer's wireless options.
2. Use a web browser to access the Configuration pages.
3. On the Administration menu, click Logs > Syslog.
4. Change the applicable SysLog Server option to On.
5. In the Name field, enter the server's IP address or domain name.
6. In the Syslog Facility field, select the log type to send to the server.
7. In the Syslog Severity field, select the event severity level to send to the server.
All events with a severity level equal to or greater than the severity selected are captured
in the log.
8. Click Save to save the changes or Cancel to clear any changes without saving.
Page 138 of 171 LUM0063AA Rev 05/05/2014
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.