Integration Guide

LIM0001AA Rev B (DRAFT)
Chapter 2: Hardware and Pinouts
This chapter provides information about the following:
l Connectors and cable recommendations.
l Connector pin details.
l Antenna selection, location, and installation considerations.
l Specifications for each embedded radio model, including operating temperature thresholds and
voltage requirements.
l Mechanical drawings of each embedded radio model.
Embedded Radio Connector Pinouts
Each embedded transceiver model has a 10 or 14 pin connector. The following sections provide information
about the function of each pin in the connector, and what to do if you do not use the pin.
10-Pin Connector
The following pin information applies to the straight 10-pin connector on the MM2-MR-T and MM2-MR-R
models:
Pin
Input/
Output Description Label If Not Used
1 Input Power B+
2 Input Reset Interrupt Pull High
3 Input Data Terminal Ready DTR Pull to Ground
4 Ground Ground GND
3
Draft