Installation Guide

Equipment and Tools Required for Installation
LIG0002AC Rev G
Contacting FreeWave Technical Support
For up-to-date troubleshooting information, check the Support page at www.FreeWave.com.
FreeWave provides technical support Monday through Friday, 7:30 AM to 5:30 PM Mountain Time (GMT -7).
Call toll-free at 1.866.923.6168, within Colorado call 303.381.9200, or contact us through email at
[e-mail].
Documentation Feedback
Send comments or questions about this document's content to [e-mail]. Include the title of
the document or the document's part number and revision letter (found in the footer) in youremail.
Equipment and Tools Required for Installation
The following equipment and tools are required for installation:
l
Permits required for the installation site.
l
FreeWave transceiver and its mounting bracket.
l
Ground rod, wire, and clamp (available at electronic supply stores).
l
National Electrical Manufacturers Association (NEMA) 4 industrial enclosure.
l
The proper antenna for your installation. For information about approved antennas for use with
FreeWave transceivers, see "Approved Antennas" на стр.11.
l
Outdoor coaxial cable for antenna installation.
l
Interior cables for data and power, available for purchase from FreeWave.
l
Cable ties.
l
Coaxial surge suppressor.
l
Waterproofing coax-sealant, foam, or mastic tape.
l
Electrical tape.
l
Electrical coating (if using foam or mastic tape for waterproofing).
l
Laptop with Tool Suite or a terminal emulator installed to program the transceiver. The latest
version of Tool Suite is available on www.FreeWave.com.
l
Serial cable or serial-to-USB converter cable.
l
Diagnostics cable.
l
Spare wire for loop back tests.
l
Screwdriver.
l
Pliers.
l
This installation guide.
2