Installation Guide
Table Of Contents
- About This Installation Guide
- Equipment and Tools Required for Installation
- Transceiver Installation Overview
- Choosing a Location for the Transceiver
- Installing the NEMA Enclosure
- Mounting the Transceiver in the NEMA Enclosure
- Powering the Transceiver
- Configuring the Transceiver
- Approved Antennas
- Installing the Antenna
- Cable Loss and Transmit Power Settings
- Waterproofing External Connections
- Board-Level and DB9 Pinouts
Table Of Contents
About This InstallationGuide 1
Assumptions 1
Notational Conventions 1
Contacting FreeWave Technical Support 2
Documentation Feedback 2
Equipment and Tools Required for Installation 2
Transceiver Installation Overview 4
Choosing a Location for the Transceiver 4
Installing the NEMA Enclosure 4
Mounting the Transceiver in the NEMA Enclosure 4
Ruggedized Gannet Enclosure Din Rail Mounting Instructions(MBRK-DIN-N) 5
Ruggedized Gannet Enclosure Mounting Shoe Instructions (MHS-WMS) 5
Board-Level and Ruggedized Enclosure Din Rail Mounting Instructions (MBRK-DIN-K) 6
Protective Mounting Bracket Kit Instructions (PMB-ENCL) 8
Powering the Transceiver 9
Configuring the Transceiver 10
Approved Antennas 11
Installing the Antenna 11
Cable Loss and Transmit Power Settings 13
Waterproofing External Connections 15
Board-Level and DB9 Pinouts 16
RF Board Level Pinout 16
RS232 Pin Assignments (DB-9) 17
RS422 and RS485 Full Duplex Pinouts 17
RS485 Half Duplex Pin-Outs 18
LIG0002AC Rev G iv