User's Manual

Spread Spectrum Wireless Data Transceiver User Manual
LUM0002AF Rev D Version 6.3 31
(0)
HOP TABLE VERSION
Entry 0 allows the user to choose the portion of the band in which the transceiver will operate.
Selection Name Band
0 Standard Full 902-928 MHz
1 Australia 915-928 MHz
2 International 902-928 MHz, 16 fewer frequencies than full U.S. set
3 Taiwan 916-920 MHz
4 New Zealand 921-928 MHz
5 Notch Uses 902-928 MHz with center frequencies of 911-
919 MHz notched out
6 Brazil 902-915 MHz
Note: Do not use FreqKey 14 (E) with the Australia (915-928 MHz), Taiwan (916-920 MHz), and New
Zealand (921-928) hop tables.
(1) HOP TABLE SIZE
The Hop Table Size defines how many separate channels will be used by a given network. For 900MHz
networks, the Hop Table Size may be set from 50 to 112.
(2)
HOP FREQ OFFSET
The Hop Freq Offset option is not functional in the 900 MHz spread spectrum transceiver.
Note: Regardless of the FreqKey used, all transceivers in either Point-to-Point or Point-to-MultiPoint
networks must be set to identical Hop Tables Version, Hop Table Size and Hop Freq Offset.
Available options