User's Manual

The SAFECONNECT Belt Bridge:

• Is equipped with a Bluetooth device that accepts a connection

request from a Sirius Wireless link device within six feet line-of-

sight distance

• Has a radio transceiver that responds to poll requests from the

SAFECOM

Command Center of the SAFESITE Multi-Threat

Detection System

• Is equipped with a GPS global positioning device

NOTE: The device does not usually detect a signal position

indoors, unless located near a window.

• Is designed to be belt-mounted or carried over the shoulder via the

included case and strap, with the antenna facing away from the

user’s body

Wearing the SAFECONNECT Belt Bridge with the antenna

facing the user will degrade performance and may subject

the user to levels of emissions that exceed those allowed by

the FCC.

• Is equipped with an ON/OFF button

• When the unit is OFF, press the ON/OFF button for

approximately one second until the LEDs turn ON.

• When the unit is ON, press the ON/OFF button for

approximately five seconds until the LEDs turn OFF.

• Is equipped with three multi-color LEDs (TABLES 1 through 3)

• Must be configured with the corresponding network ID and

frequency key to match the SAFESITE System with which it is

intended to operate

• Must be set to a unique address for each device using the hex

rotary switch located behind the batteries. The unit address is a

function of the switch setting (TABLE 4).

WARNING