User's Manual

• Is equipped with a GPS global positioning device

NOTE: The device does not usually detect a signal position

indoors, unless located near a window.

• Is designed to be belt-mounted or carried over the shoulder via the

included case and strap

• Is equipped with an ON/OFF button

• When the unit is OFF, press the ON/OFF button for

approximately one second until the LEDs turn ON.

• When the unit is ON, press the ON/OFF button for

approximately five seconds until the LEDs turn OFF.

• Is equipped with three multi-color LEDs (TABLES 1 through 3)

• Must be configured with the corresponding network ID and

frequency key to match the SAFESITE System with which it is

intended to operate

• Must be set to a unique address for each device using the hex

rotary switch located behind the batteries. The unit address is a

function of the switch setting (TABLE 4).

Understanding the Display

Table 1. Power LED Display Logic

LED DESCRIPTION

Green Both Sirius Wireless Link and SAFECONNECT batteries are good

Yellow Sirius Wireless Link battery is low

(The unit must be linked for this information to be displayed)

Red SAFECONNECT battery is low (highest priority condition)

Table 2. COMM LED Display Logic

LED DESCRIPTION

Green All links are established

Yellow Loss of communications to Sirius Wireless Link or Sirius instrument

Red Loss of communications to SAFECOM (highest priority condition)

Table 3. GPS LED Display Logic

Green Sufficient signal for 3D location

Yellow Sufficient signal for 2D location

Red Insufficient signal

OFF No GPS signal, GPS device inoperative