User's Manual

FreeWave Technologies Spread Spectrum Transceiver User Manual
900 MHz and 2.4 GHz
V5.0S
31
(0) Hop Table Version
Entry 0 allows the user to choose the portion of the band in which the transceiver
will operate. These choices are show in the table below:
Note: Do NOT use Freq Key 14 (D) with the Australia (915-928MHz) hop table
(1) Hop Table Size
Within a specified band you may select the number of frequencies to be used,
ranging from 50 to 112.
(2) Hop Freq Offset
The Hop Freq Offset option is not functional in the 900 MHz spread spectrum
transceiver.
Note: Irrespective of the Freq Key used, all transceivers in either point to point or
point to multipoint networks must be set to identical Hop Tables and Table
Size (number of frequencies).
Table 8: Frequency Bands,
900 MHz
Selection Name Band
0 Standard Full 902-928 MHz
1 Australia 915-928 MHz
2 International 902-928 MHz, 16 fewer frequencies than full US set
3 Taiwan 916-920 MHz
4 New Zealand 921-928 MHz
5 Notch Uses 902-928 with center frequencies of 911-919 notched out
6 Brazil 902-915 MHz