User's Manual

FreeWave Technologies Spread Spectrum Transceiver User Manual

900 MHz and 2.4 GHz

V5.0S

Note: The Subnet ID works only in Multipoint Networks using NetworkID.

Note: In typical Multipoint Networks the Freq Key must be at the same setting for

all transceivers. If the SubnetID is used the sub network may be set to a

different Freq Key.

Note: If both Rcv SubnetID and Xmit SubnetID are set to 0 the SubnetID will show

Roaming in the menu. This setting will allow a mobile slave to roam from

subnet to subnet within a network.