Instructions / Assembly

Attach the two Side Panels (G1&G2) to the Table Top (G5) by securing with

M6*35 Head Cap Screws (D) and Washers (E). Do this in 4 places.

- 16 -

NOTE:DO NOT TIGHTEN THE SCREWS COMPLETELY.

NOTE:

Do NOT tighten any screws fully first until you have tightened all the

screws.

This may cause the frame to warp.

If there is still wobbles or screw holes cannot be aligned, loosen the

screws and tighten sequentially.

If the Table is not stable it could lead to damage to the product.