Instructions / Assembly

3
Attach the Table Leg (L) to the Table Top (J) and Back Panel (M) by
securing with Head cap screws (F) and Washers (E). Hand tighten to
line up all the pieces.
Pls don’t fully tighten in this step. Do this in 2
places.
4
- 8 -
F
E
N
L
L
F
E
K
M
M
J
x2
x3
Note: If any screw holes cannot be
aligned, pls loosen all the screws and go
back step 1 and restart assembly.
Place the table on a level surface.
Your table is ready for use.
Attach Table Bottom (N) to the Table Legs (L) &(K) and Back Panel (M)
by securing with Head cap screws (F) and Washers (E). Hand tighten to
line up all the pieces.Do this in 3 places. Then tighten all 8 screws into
place with Allen Key (G).