Instructions / Assembly

- 7 -
M
F
E
K
K
F
E
J
J
NOTE:
When tightening the screws, tighten sequentially.
DO NOT tighten any screws fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles or screw holes cannot be aligned,loosen the
screws and execute this same process.
If the Table is not stable it could lead to damage to the product.
1
2
x1
x2
Attach the Table Leg (K) to the Table Top (J) by securing with Head cap screws
(F) and Washers (E). Hand tighten to line up all the pieces. Pls don’t fully
tighten in this step. Do this in 1 place.
Attach the Back Panel (M) to the Table Leg (K) and Table Top (J) by securing
with Head cap screws (F) and Washers (E). Hand tighten to line up all the
pieces. Pls don’t fully tighten in this step. Do this in 2 places.