Instructions / Assembly

V
- 19 -
SU NSIT T
3
Complete the assembly of
adjustable feet (J) by securing with
M6*35 Head Cap Screws (F) and
Washers (H) as drawing. Tighten
into place with Allen Key (I). Do
this in 8 places.
4
Turn the table over and place on a flat
surface, adjust height for balance.Then
put the Glass (V) on the top.Your table
is ready for use.
Adjust height
for balance
Adjust low
for balance
Adjust Pre-installed levellers
height for balance
T
S
8
H
F